How to Build a Fire Pit

If a store bought fire pit is not your cup of tea, don’t worry because now you can easily make your own at home. You might come across huge descriptions online about how to build a fire pit, but we have simplified the process and collated a short list for your convenience.

Here are the instructions about how to build a fire pit:

  • Location is extremely important – choose a place without branches overhead and away from structures. There shouldn’t be underground wires or cables and the ground has to be even.
  • Drive in a couple of stakes into the ground at a diameter of 2 feet and then use spray paint to outline a circle around the pit.
  • Dig a standard sized hole inside the circle – say about 12 inches in depth and 6 inches wide. Fill half of it with pea gravel and top the second half with sand.
  • 3 inches of sand should be added to the circle – this is important for leveling and ensuring the fire doesn’t reach the roots underneath.
  • Use about 3 rows of pavers around the pit as the gaps between them are for proper ventilation – your pit is now complete.

Safety tips to remember

  • Don’t forget to verify if local codes allow open fires in your area.
  • Find out if there are limitations about distance before you start marking the location.
  • Make use of appropriate fire starters and don’t try it with gasoline or lighter fluid as it might be dangerous.
  • Always have water on standby in case the fire spreads outside.
  • Never light fires when the area around you is dry because a small spark can lead to a brush fire.

Hope the information about how to build a fire pit is useful – all the best!

24 Photos of the How to Build a Fire Pit

Comment Box of How to Build a Fire Pit

Leave a Reply